B10B Factory Reset: Difference between revisions

B10B Factory Reset (view source)

63 bytes added , 12 April 2022

3

edits

Revision as of 19:22, 16 August 2019 (view source) Adsb (talk \| contribs) m (Hashcat takes about 9.5 hours to crack a SHA-512 hash) ← Older edit		Latest revision as of 20:15, 12 April 2022 (view source) Silverphish (talk \| contribs) (→‎Reset to AAISP Base Settings)
(2 intermediate revisions by one other user not shown)
To reset the router to the AAISP base settings, follow these steps: #Unplug everything from the router except the power and phone line #Switch router on, wait for it to boot up #With a paperclip, pen, etc., hold in the reset button ==Reset to the ZyXEL Factory Settings== To erase the default AAISP settings, the 'ROM-D' file needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user (see above) and then issuing the <syntaxhighlight inline enclose="none" lang="bash">zycli save_default clean</syntaxhighlight> command. Here is an example: VMG3925-B10B Login: supervisor Password: [your ~~admin~~supervisor password] > zycli save_default clean ROM-D cleaned. </syntaxhighlight> At this point you ~~can~~should reset the router for this to be applied - by holding in the reset button for 5 seconds. The router will then boot up in its original factory settings without any of the AAISP configuration settings~~. You can reset the router by holding in the reset button for 5 seconds~~. In this state, the router has ZyXEL's default IP address, username and password.