Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Bell wire: Difference between revisions

841 bytes added ,  16 October 2018
m
Minor updates
(Be clearer on microfilters. Add table for pin allocation)
m (Minor updates)
 
(3 intermediate revisions by the same user not shown)
Telephones designed for the UK will use 3 wires - 'A', 'B', and 'bell'. Their bells will be connected between the bell wire and the 'A' wire. If used in an installation without a bell capacitor or without a bell wire, such telephones won't ring their bells. A good example is a plug-in electronic ringer I have - the BT phone plug has only 2 pins - for the bell wire and the 'A' wire.
 
The US telephone system is different, and each telephone provides its own bell capacitor - but in the US doesn't use pulse dialling anyis morerare (although exchanges still support it). They tackled bell tinkle mechanically. Telephones designed for thatthe US market will ring without a bell capacitor or without a bell wire.
 
The bell wire complicates DSL filtering - it's difficult having a twisted pair with only one wire. The best solution is a filtered master socket (e.g. NTE5c with VDSL SSFP), with the bell wire connected to all other sockets, and no microfilters. If using microfilters on each telephone, some microfilters include a bell capacitor, but some others don't - I've not seen any which properly support the bell wire.
 
= BT plug/socket numbering =
{| class="wikitable"
|-
! FunctionPin number !! PinFunction number ||!! Notes
|-
| 1 || || ''For non-telephone facility'' ??
|-
| 2 || 'B' wire || Used to be guaranteed more negative voltage than 'A' wire
| 4 || Local earth || ''Needed for 'C' wire signalling, which is obsolete''
|-
| 5 || 'A' wire ||
|-
| 6 || 'C' wire || '' 'C' wire signalling is obsolete''
|-
|}
 
[[Category:Technical Documents]]
 
= So, can I disconnect my bell wire ? =
 
Several people have reported an improvement in DSL speed by disconnecting the bell wire. It presumably picks up interference and feeds it into the other telephone wiring.
 
If you have no pulse dialling telephones, or you have one or more pulse dialling telephones but aren't worried by bell tinkling, then you could consider disconnecting the bell wire. But disconnecting the bell wire could result in some telephones not ringing. You would have to test each phone, perhaps trying with a microfilter if a phone fails to ring.
editor
469

edits