12,270
edits
Category:Bonding: Difference between revisions
→Mixing BT and BE lines
No edit summary |
|||
|
If you can't afford to buy a FireBrick, you might try [http://pfsense.org pfSense] as a free alternative. From version 2.0.1, it's possible to configure pfSense for policy-based routing and fallback over multiple WAN connections. One AAISP customer runs this with two AAISP ADSL lines, switching to an AAISP SIM card if both lines fail - see his [http://blog.martinshouse.com/2012/01/multi-wan-multi-lan-no-nat-routing-with.html blog entry] for details. However, pfSense does not yet have IPV6 support, and (as of 2.0.1) the recovery from fallback might not always work perfectly.
=Mixing BT, TT and BE lines=
AAISP BT lines, TalkTalk Wholesale and BE Wholesale lines can all be used for bonding, and gives even great resilience in the case of a fault in BT or a fault in BE. - as of October 2010, BE lines need to run on a reduced MTU of 1492 - and bonding will need all lines to use this reduced MTU. This is an tickbox option on the control pages though
=Bonding FTTC Circuits=
| |||