Category:FireBrick IPsec Road Warrior

From AAISP Support Site
Revision as of 15:47, 30 July 2015 by AA-Andrew (talk | contribs)


The FireBrick manual goes into some detail on configuring IPsec. These pages below contain specific examples for a simple scenario where you have one or more clients devices - iPhones iPads, Android phones/tablets or Windows machines, and a FireBrick in your home or office, and you would like to VPN (using IPsec) to the FireBrick and have an IP address on your LAN.

First, create certificates and the FireBrick config, then look at the pages for the device you are wanting to configure

Menu-Certificate.svg

Certificates

First: Create the required Certificates, we have some tools available to make this a little easier

Menu-FireBrick.svg

FireBrick config

Second: Configure the FireBrick

Third: Configure your device:

Menu-Apple.svg

iPhone & iPad

Apple iPhones and Apple iPads

Menu-Android.svg

Android

Android, eg phones and tablets

Menu-Windows.svg

Windows

Windows 7 and Windows 10

Menu-Apple.svg

Apple OSX

Apple OSX, eg Macbook laptops etc