Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Category:IPv6: Difference between revisions

Prefix Delegation doesn't *always* return a /64 - it could be a /60 or the /48
(Prefix Delegation doesn't *always* return a /64 - it could be a /60 or the /48)
 
(4 intermediate revisions by 3 users not shown)
<indicator name="Routers">[[File:menu-router.svg|link=:Category:Routers|30px|Back up to the Routers Category]]</indicator>
=IPv6 on AAISP Broadband=
This is how we route and assign IPv6 on DSL connections.
 
Customers are allocated a /48 block of addresses - this is usually per customer, and so a customer with multiple circuits or sites will have at least a /64 allocated from the larger /48 block. A /48 contains 65536 /64's and a /64 subnet is 18 million trillion addresses.
 
(Here, CPE refers to the router belonging to the customer which is being used at their end of the broadband line.)
2001:8b0:1111:1111:0:ffff:[your IPv4 WAN in HEX]
 
At this point we will also be routing any IPv6 blocks to this WAN address. Usually a line will have at least one /64 block - customers can request, via the control panel, extra /64 blocks, and/or extra /60 blocks, or to route the whole /48 block.
 
We also respond to DHCPv6 Prefix Delegation (PD) from the CPE and we'll tell the CPE onethe oflowest thenumerically /64numbered Blocksblock. -this may be requested multiple times by the CPE in which case the next highest block will be sent.
 
The CPE will also assign itself a [http://en.wikipedia.org/wiki/Link-local_address Link Local] address in the form of FE80::, and will be based on the MAC address of the interface.
| IPv6 address || As advised || You can use any address space from the block assigned to you. You can also use 2002:: prefix space using any of your IPv4 address space. All of these addresses will be accepted from your line whether native IPv6 in PPP or tunneled over IPv4. Other source addresses will not be accepted. The router address and prefix delegation can be obtained by the router using DHCPv6 over PPP.
|-
| DNS || 2001:8b0::2020 2001:8b0::2021" || These are our customer facing DNS resolvers for IPv6 use. The DNS servers can be obtained by your router using DHCPv6 over PPP.
|}
 
 
[[File:Ipv6Assign.png|none|frame|Assign new IPv6 blocks buttons on the Control Pages]]
 
The new block will be routed to your router (once your router has reconnected to AAISP), you will then have to allow the new block through any firewall you have, and then route the new block appropriately on your local network.
 
Using a single /60 block rather than multiple /64 blocks can help when using routers which use Policy Based Routing, e.g. OpenWrt.
 
[[Category:Routers]]
[[Category:Configuring]]
editor
471

edits