Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Category:Technicolor DGA4134: Difference between revisions

double spaces and trailing whitespace
mNo edit summary
(double spaces and trailing whitespace)
(8 intermediate revisions by one other user not shown)
 
[[File:DGA4134.png|thumb|DGA4134]]
[[File:DGA-DGA4134-angle.png|thumb|Ports]]
[[File:DGA4134-rear.png|thumb|Rear]]
[[File:DGA4134-front.png|thumb|Front]]
 
These pages are about the Technicolor DGA4134. .
==Technicolor DGA4134==
This router was introduced as a stop-gap for the DGA0122 in October 2021 due to supply shortages with the DGA0122.
 
The DGA4134 and the DGA0122 are very similar. They look physically different, but the user interface, and physical ports are very similar. The DGA4134 has WiFi 6 though. Some of the support pages for the DGA0122 are also relevant to the DGA4134.
 
Works well with the 'Technicolor OWA0131 WiFI Extender'.
 
==Basic Specs==
*1x 1 GE WAN port
*Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
*WiFi is:
**2.4GHz (2x2) Wi-Fi 6 (IEEE 802.11ax)
**5GHz (4x4) Wi-Fi 6 (IEEE 802.11ax)
*ADSL1, ADSL2+
*VDSL (FTTC)
*''G.Fast'' - usingconnect the red Ethernet WAN port connected '''to an existinga G.FAST modem'''
*''FTTP, FTTPoD'' - usingconnect the red Ethernet WAN port '''to theyour fibre termination 'modem'unit'''. Suitable for 1G/s FTTP, see note on speeds below.
 
'''Bridge mode:''' The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode
 
===Speeds===
This router can be used with faster FTTP circuits, eg up to 1Gb/s. Throughput on wifi will be limited to much lower speeds, but devices connected using wired connections should see around 950 Mbps when using our speed tester.
 
==Admin and WiFi passwords==
!Once configured
|-
!IP:
|192.168.1.1
|192.168.1.1 or your public block
|-
!Username:
|colspan="2" |admin (or engineer for some superpowers)
|-
!Password:
|rowspan="3"| as stated on the rear panel
|rowspan="3"| as printed on the A&A card
|-
!Wifi Name:
|-
!WiFi Password:
|}
 
editor
698

edits