12,270
edits
CityFibre ONT: Difference between revisions
m
→Normal state of the LEDs
m (→LEDs) |
|||
| (4 intermediate revisions by the same user not shown) | |||
|
[[File:CityFibre-ONT-Angle.png|thumb|CityFibre ONT]]
This page has information about the CityFibre provided ONT - the box that connects the CityFibre fibre connection to your own router.
=LEDs=
===Overview===
There are four LEDs on the CityFibre ONT:
*LED 4 (Right) - Ethernet
===Normal state of the LEDs ===
When working properly this is the state each light should be in, indicating a good connection/service:
*'''Power''': Solid Green - Device has booted up ok
*'''Broadband''': Solid Green - physical connection is established to the fibre
*'''Service''': Solid Green - Internet service has been established
*'''Ethernet''': Green - connected to your router
=Diagnostics=
*Reset
===Reboot the CityFibre ONT===
You can pull the power cable, wait a few seconds and plug it back in again. This is safe to do and will mean the ONT reboots and reconnects to the fibre network.
===Reset the CityFibre ONT===
Use a paperclip, or similar, and hold in the reset switch for 10-15 seconds. This will cause a reboot and factory reset of the ONT.
| |||