CityFibre ONT: Difference between revisions

CityFibre ONT (view source)

Revision as of 14:56, 23 March 2023

103 bytes added , 23 March 2023

m

no edit summary

AA-Andrew

autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators

12,270

edits

Revision as of 15:00, 24 February 2023 (view source) AA-Andrew (talk \| contribs) m (→‎LED flashing?) ← Older edit		Revision as of 14:56, 23 March 2023 (view source) AA-Andrew (talk \| contribs) mNo edit summary Newer edit →
(7 intermediate revisions by the same user not shown)
[[Category:CityFibre Faults]] [[Category:FTTP Faults]] [[Category:Routers]] [[File:CityFibre-ONT-Angle.png\|thumb\|CityFibre ONT]] [[File:CF-ONT-Labeled.png\|thumb\|CityFibre ONT]] This page has information about the CityFibre provided ONT - the box that connects the CityFibre ~~fibre~~ connection to your own router. ONT stands for Optical Network Terminal, sometimes (mistakenly) called a modem. * For help with router configuration for CityFibre connections, please see: [[General_Router_Settings#CityFibre_FTTP\|General Router Settings page]] * The ONT is a 'Calix 801G GigaPoint v2' device and measures 10.16x2.07x3.25cm (WxHxD). ▼ ▲The ONT is a 'Calix 801G GigaPoint v2' device and measures 10.16x2.07x3.25cm (WxHxD). =LEDs= '''Broadband''': * '''Solid Green''': physical connection is established to the fibre Flashing red and then green: Not able to establish a stable connection - re-seat the green fibre plug to the ONT to make sure its connected securely. Off: Can't detect the optical cable '''Service''': ===Reset the CityFibre ONT=== Use a paperclip, or similar, and hold in the reset switch for 10-15 seconds. This will cause a reboot and factory reset of the ONT. =Other information=▼ ===CityFibre VLAN ID=== Important: The customer's router will need to talk PPPoE on '''VLAN 911'''. ▲=Other information= ===MTU=== Can pass Jumbo frames - so if your router supports [[MTU\|1500 byte MTU]] in PPP, then you can pass 1500 byte packets: