Debian IPv6 Tunnel Config

From AAISP Support Site
Revision as of 14:33, 16 February 2011 by Nickshore (talk | contribs)
Jump to: navigation, search

Draft in progress .....


Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:


remembering to change the XXXX to whatever value you've been allocated.

After that just type "ifup 6in4" (as root) and your link should be up.


This could be it !! :

 auto 6in4
 iface 6in4 inet6 v4tunnel
   address 2001:8b0:XXXX::1      
   local <ppp0 IPv4 IP>     
   endpoint 81.187.81.6
   ttl 64
   up ip route add default  dev 6in4