Disable SIP ALG: Difference between revisions

← Older edit

Disable SIP ALG (view source)

Revision as of 14:17, 28 August 2019

782 bytes added , 28 August 2019

m

Add VMG3925 details (same as VMG1312)

Adsb

editor

471

edits

Revision as of 15:43, 19 March 2015 (view source) AA-Andrew (talk \| contribs) m (→‎TP Link) ← Older edit		Latest revision as of 14:17, 28 August 2019 (view source) Adsb (talk \| contribs) m (Add VMG3925 details (same as VMG1312))
(8 intermediate revisions by 3 users not shown)
An ALG is an 'Application Layer Gateway'. Typically it's software in a router that inspects VoIP traffic and modifies the information inside in order to try and help make VoIP work better. In practice they tend to make ~~thins~~things worse. you may end up with one way audio, no audio or be unable to register. Disabling an ALG on your router may well help with any VoIP problems. Here are some notes on various routers that we've come across: == ZyXEL VMG1312 and VMG3925 == Usually disabled by default. Log in to the router's web interface Go to: *Network Setting - NAT - ALG Disable the settings there == Technicolor == To completely disable the SIP ALG, you will need to connect via Telnet to your router. ~~<nowiki>~~ :connection unbind application=SIP port=5060 :saveall :exit~~</nowiki>~~ (On older models/firmware the command to use is '':nat unbind...'' rather than '':connection unbind...'') ==Billion 7800== == Neatgear== From Wan Setup Menu: go to NAT Filtering and ~~uncheck~~check the box next to "Disable SIP ALG" ==Vigor2750, Vigor2130== If SIP ALG is disabled successfully, it will show Nat Sip v2 switch off! This will reset when rebooted and will need to be set again. ==~~More~~BT ~~info:~~Business Hub== #Open a browser go to 192.168.1.254 #Click on ‘Advanced Settings’ #Enter your admin password the default admin password can be found on the bottom of the router). #Click Continue to 'Advanced Settings' #Click Firewall then 'Configuration' and scroll down to 'Application Layer Gateway' #Click Yes next to 'Disable SIP ALG' and click Apply ==ZyXEL 660 range== #telnet router #Menu option "24. System Maintenance". #Menu option "8. Command Interpreter Mode". #Type in: ip nat service sip active 0 ==More info== *More info on: [http://www.voip-info.org/wiki/view/Routers+SIP+ALG VoIP-Info] [[Category:~~VoIP_Faults~~VoIP Faults]]