FireBrick 2700 Configuration run-through: Difference between revisions

FireBrick 2700 Configuration run-through (view source)

198 bytes removed , 30 May 2020

m

no edit summary

12,270

edits

Revision as of 02:46, 13 February 2017 (view source) Reedy (talk \| contribs) (lots of lang=xml) ← Older edit		Revision as of 09:44, 30 May 2020 (view source) AA-Andrew (talk \| contribs) mNo edit summary Newer edit →
(2 intermediate revisions by one other user not shown)
[[File:2700-small.png\|link=:Category:FireBrick]] =Also See:= *Our main [[:Category:FireBrick\|FireBrick]] wiki page Here we will build a config file for a FB2700, from scratch, it should help you to build a configuration for your line(s) and help you understand the XML syntax etc. The examples are relevant for ADSL (Be and BT) as well as FTTC/FTTP through AAISP. These examples are based on V0.00.608 (2011-01-05), and future firmware releases may have different configuration requirements. ~~Som people converting from a 105 may prefer to also use the 105 converter tool, and base that output on the configuration for your new 2700. more info at: http://www.firebrick.co.uk/fb105config.php~~ We have an AAISP ADSL line with the following details: ==1500 MTU?== The Default MTU is 1492 for PPPoE. However, if your modem supports jumboframes, then you should be able to use a full 1500MTU on the PPPoE. The BT supplied modem for FTTC does support this, other modems may or may not... Config wise, just add mtu="1500" to the ppp element. e.g.: