12,274
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 13:01, 5 January 2011
, 5 January 2011no edit summary
No edit summary |
No edit summary |
||
|
<port name="LAN3" ports="3"/>
<port name="LAN4" ports="4"/>
<interface name="LAN1" port="LAN1">
<subnet comment="dhcp client"/>
<subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true"
<port name="LAN3" ports="3"/>
<port name="LAN4" ports="4"/>
<interface name="LAN1" port="LAN1">
<subnet comment="dhcp client"/>
<subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true" comment="Temporary IPs for setup only, delete when finished configuring"/>
<port name="LAN3" ports="3"/>
<port name="WAN1" ports="4"/>
<interface name="LAN1" port="LAN1">
<subnet comment="dhcp client"/>
<subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true" comment="Temporary IPs for setup only, delete when finished configuring"/>
== Bond the PPPoE: ==
''Bonding on a 2700 requires the Bonding capability - found on the Fully-Loaded and Bonding variants.''
Simply setting speed=x in the ppp config will bond the PPPoE for uplink
| |||