Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick 2700 Configuration run-through: Difference between revisions

FireBrick 2700 Configuration run-through (view source)

Revision as of 14:12, 5 January 2011

93 bytes added ,  5 January 2011
Undo revision 273 by AA-Andrew (talk)
(Undo revision 273 by AA-Andrew (talk))
 
The default configuration (or a fully-loaded FireBrick) looks like this:
<pre>&lt;?xml version="1.0" encoding="UTF-8"?>&gt;▼
<syntaxhighlight lang="xml">
<&lt;config xmlns="http://firebrick.ltd.uk/xml/fb2700/"▼
▲<?xml version="1.0" encoding="UTF-8"?>
▲<config xmlns="http://firebrick.ltd.uk/xml/fb2700/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/
http://firebrick.ltd.uk/xml/fb2700/0.00.605.xsd"
timestamp="1970-01-01T00:00:07Z">&gt;
<&lt;port name="LAN1" ports="1"/>&gt;
<&lt;port name="LAN2" ports="2"/>&gt;
<&lt;port name="LAN3" ports="3"/>&gt;
<&lt;port name="LAN4" ports="4"/>&gt;
<&lt;interface name="LAN1" port="LAN1">&gt;
<&lt;subnet comment="dhcp client"/>&gt;
<&lt;subnet ip="2001:DB8::1/64 10.0.0.1/24" nat="true"
comment="Temporary IPs for setup only, delete when finished configuring"/>&gt;
<&lt;dhcp ip="10.0.0.100-199"/>&gt;
<&lt;/interface>&gt;
<&lt;ppp port="LAN4" username="startup_user@startup_domain" password=""
comment="Example PPPoE config for DSL/FTTC/FTTP/etc"/>&gt;
<&lt;services>&gt;
<&lt;ntp/>&gt;
<&lt;telnet comment="Set allow IP list to restrict access"/>&gt;
<&lt;http/>&gt;
<&lt;/services>&gt;
<&lt;rule-set target-interface="LAN1" drop="reject" comment="default
firewall rule - block incoming">&gt;
<&lt;rule source-interface="self" comment="allow from the FireBrick
though"/>&gt;
<&lt;/rule-set>&gt;
<&lt;/config>&gt;
</syntaxhighligh>
 
</pre>
Which sets up the 4 Ethernet ports as separate LANs, and an IP of 10.0.0.1 (and 2001:DB8::1)&nbsp;with the FireBrick acting DHCP server on the first port. So, connecting a computer to Port 1 should get you a 10.0.0.x IP address, and you can access http://10.0.0.1
 
Port 4 is set as an example of a PPPoE client, we'll set this up a little later.
 
= Configuring Initial Basic Settings =
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,274

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/274’