12,274
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 15:49, 12 January 2011
, 12 January 2011→Bond the PPPoE:
|
''Bonding on a 2700 requires the Bonding capability - found on the Fully-Loaded and Bonding variants.''
Simply setting speed=x in the ppp config will bond the PPPoE for uplink
The speed value is in ''bits per sec''. You can use G/M/K when specifying the value, as well as B for bytes, or i, power of 2. eg, 1000000 is the same as 1M)
eg:
| |||