12,274
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 21:59, 4 February 2011
, 4 February 2011→PPPoE
(→PPPoE) |
|||
|
<ppp port="WAN1" username="abc@a.1" password="secret" comment="BT ADSL" graph="BT ADSL" log="true" mtu="1500"/>
</syntaxhighlight>
==ZyXEL P660R-D1 Notes==
(These notes will be similar for any type of ADSL router in Bridge mode, or ADSL modems.)
When setting up the ZyXEL to work with the FireBrick, set the WAN settings to be:
===For a Be, PPPoA, or a BT Line:==
*Name: AAISP (But can be anything)
*Mode: Bridge
*Encapsulation: RFC 1493
*Multiplexing: VC
*VPI: 0
*VCI: 38
*ADSL modulation type: Multimode
===For a Be, PPPoE, Line:==
*Name: AAISP (But can be anything)
*Mode: Bridge
*Encapsulation: RFC 1493
*Multiplexing: LLC
*VPI: 0
*VCI: 101
*ADSL modulation type: Multimode
Also make a not of the LAN address, as you'll set a subnet on the FireBrick below so that you can still access the ZyXEL from your LAN.
= Filters =
| |||