12,274
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 12:58, 5 January 2011
, 5 January 2011no edit summary
No edit summary |
|||
|
= Overview =
These examples are based on V0.00.608 (2011-01-05), and future firmware releases may have different configuration requirements. Som people converting from a 105 may prefer to also use the 105 converter tool, and base that output on the configuration for your new 2700. more info at: http://www.firebrick.co.uk/fb105config.php
These config examples havn't been fully reviewed yet, so please bear that in mind, they are based on a working config though.
We have an ADSL line with the following details:
== Bond the PPPoE: ==
''Bonding on a 2700 requires the Bonding capability - found on the Fully-Loaded and Bonding variants.''
Simply setting speed=x in the ppp config will bond the PPPoE for uplink
<ppp port="WAN2" username="abc@a.2" password="secret" comment="BT ADSL" graph="BT ADSL 2" log="true" speed="1M"/>
</pre>
Since each PPP connection will give the FireBrick a default route, the FireBrick will use both, and upload traffic on each ppp connection up to the speed given.
| |||