12,274
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 14:25, 5 January 2011
, 5 January 2011→Default Config
|
= Default Config =
<syntaxhighlight>
<ntp timeserver="90.155.53.32 2001:8B0:0:53::5A9B:3520"/>
</syntaxhighlight>
The default configuration (or a fully-loaded FireBrick) looks like this:
Which sets up the 4 Ethernet ports as separate LANs, and an IP of 10.0.0.1 (and 2001:DB8::1) with the FireBrick acting DHCP server on the first port. So, connecting a computer to Port 1 should get you a 10.0.0.x IP address, and you can access http://10.0.0.1
Port 4 is set as an example of a PPPoE client, we'll set this up a little later.
= Configuring Initial Basic Settings =
| |||