12,270
edits
FireBrick 2700 with 4G ZTE MF823: Difference between revisions
FireBrick 2700 with 4G ZTE MF823 (view source)
Revision as of 14:26, 30 January 2017
, 30 January 2017→Mode switching
m (→Mode switching) |
m (→Mode switching) |
||
|
The ZTE823 works as an Ethernet device by default, it is possible to change the mode so that it works as a modem. The idea here is that rather than the dongle NATing the connection it can be a modem and the FireBrick will be given the public WAN IP address directly.
==Switching to Modem Mode==
[[File:ZTEMF823-mode.png|
#Disable auto-connect
#*In your browser, go to: http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY
==Switching to Ethernet mode==
To put the dongle back to Ethernet mode you will need to connect the dongle to a computer in order to send it some commands via a serial terminal
#Open gtkserial or another serial terminal (or simply echo the following AT commands to /dev/ttyUSB2):
ATZ
AT&F
AT+ZCDRUN=9
AT+ZCDRUN=F
Disconnect the modem from the computer and reconnect it to the FireBrick
[[Category:FireBrick]]
[[Category:Data SIMs]]
| |||