12,291
edits
FireBrick How to: Upload Route Overrides: Difference between revisions
FireBrick How to: Upload Route Overrides (view source)
Revision as of 13:28, 27 April 2016
, 27 April 2016no edit summary
m (→PPP Changes) |
mNo edit summary |
||
|
==Scenario==
You are bonding multiple lines up and down, but you want some particular device to only send traffic up a single line rather than bonding the upload. This is also assuming that you're using an AAISP (or similar) service where traffic to you is being bonded by the ISP over all the circuits.
You may want this if you have long lines and slow throughput and you wish to have your VoIP only going UP one of the broadband lines.
</route-override>
==The Result==
*All traffic TO you comes down all 3 lines. (this is handled by the ISP)
*VoIP Traffic LEAVES you up line 5
*All other traffic leaving you is bonded UP the remaining lines
*If line 3 goes down, then everything is bonded over the remaining lines
[[Category:FireBrick_How_to]]
| |||