editor
426
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
No edit summary |
CrazyTeeka (talk | contribs) m (Fixing spelling and grammar and other errors.) |
||
[[File:2700-small.png|link=:Category:FireBrick]]
To add a
==Create a route:==
<syntaxhighlight>
<route ip="::/0" gateway="81.187.81.6" comment="IPv6
</syntaxhighlight>
Here
==Update your LAN subnet to include:==
*ra="true"
*ra-mtu="1480" (1472 if MTU was 1492 before, eg over PPPoE)
*ra-dns
*and add an IPv6 address from your block to the ip="" element.
The smaller MTU is required due to the IPv6 packets being placed inside IPv4 packets.
==Add a firewall rule to allow the tunnel in==
You
<syntaxhighlight>
<rule name="IPv6 tunnel" source-interface="WAN" target-interface="SELF" source-ip="81.187.81.6" protocol="41"/>
<syntaxhighlight>
</syntaxhighlight>
Then create a LAN subnet entry with your
|