FireBrick MAC Graphs: Difference between revisions

From AAISP Support Site
mNo edit summary
mNo edit summary
 
Line 1: Line 1:
The FireBrick is able to graph traffic for each MAC address it sees.
The FireBrick is able to graph traffic for each MAC or IP address it sees.


From the manual:
From the manual:

Latest revision as of 10:54, 26 March 2015

The FireBrick is able to graph traffic for each MAC or IP address it sees.

From the manual:

There is also an option for set-graph-source-mac which causes the session to set a (forward) 
graph that is based on the MAC address of the source packet, if from an Ethernet interface. 
The graph is created if it does not exist. If set-graph is also defined then each new session 
created also causes the speed settings and long term shaper parameters to be copied from the 
named graph (in set-graph) to the MAC named graph being used. This is aimed at management of 
open WiFi and the like allowing a named shaper to be defined and a copy of its settings created 
for each client based on MAC address.

Assuming you have no current outgoing ruleset, create one such as:

 <rule-set name="LAN Outgoing" source-interface="LAN" no-match-action="continue">
     <rule set-graph-dynamic="mac" action="continue"/>
  </rule-set>