FireBrick Road Warrior iPhone iPad iOS9: Difference between revisions

Back up to the FireBrick Road Warrior Category Page
From AAISP Support Site
mNo edit summary
Line 16: Line 16:
#Log in to the FireBrick
#Log in to the FireBrick
#Got to: Config -> Certificates
#Got to: Config -> Certificates
#Click on the PEN link for the 'CA certificate
#Click on the PEM link for the 'CA certificate' (Screenshot below)
#Review the certificate, then Click Install
#Review the certificate, then Click Install (Screenshot below)
#Enter in your passcodr
#Enter in your passcode (Screenshot below)
#Review the Warning and then click Install
#Click Done
#Click Done
#The certificate is now installed! (Screenshot below)

<gallery widths=200>
FireBrick-IPsec-CertificatePage.png|Certificates page on the FireBrick, Click on the PEM link for the 'CA certificate
FireBrick-IPsec-iPad-InstallProfile.png|Review the certificate, then Click Install
FireBrick-IPsec-iPad-PAsscode.png|Enter in your passcode
FireBrick-IPsec-iPad-CertInstalled.png|The certificate is now installed!
</gallery>


== VPN Settings ==
== VPN Settings ==

Revision as of 09:24, 4 August 2015


iOS 9 is due to be released in Autumn 2015, these notes are based on the Public Beta that Apple have made available.

  • If you are running iOS 8 then please see the iOS 8 Page

iOS 8 Vs iOS 9'

The VPN setup is slightly improved in iOS 9. You can still use the iOS 8 instructions which involves creating a 'profile', or you can use the instructions below which involve sending the certificate to the iDevice and then then configuring the VPN though the settings.

Sending the Certificate

You will need to get the CA Certificate on to the iDevice, this can be done in a couple of ways:

  1. Download the file from the FireBrick
  2. Email the certificate to the iDevice

Download the file from the FireBrick

  1. Log in to the FireBrick
  2. Got to: Config -> Certificates
  3. Click on the PEM link for the 'CA certificate' (Screenshot below)
  4. Review the certificate, then Click Install (Screenshot below)
  5. Enter in your passcode (Screenshot below)
  6. Click Done
  7. The certificate is now installed! (Screenshot below)

VPN Settings