FireBrick VoIP

From AAISP Support Site

Other Pages

These pages are also related to this topic:

Note

The FireBrick VoIP platform is currently in trial on the AAISP network, these settings are useful for people on the trial or who are using VoIP on their own FireBricks. Please contact Support for more information.

Overview

The FireBrick has SIP capabilities and can be set up as a basic back-to-back SIP endpoint for a home office and provide a set of PBX features itself, or can be combined additional RADIUS and custom companion software to create a much more powerful SIP switch that can be used by larger VoIP providers. It is designed to scale well by simply adding more boxes.

AAISP use FireBrick as their SIP Platform as a 'hosted' VoIP solution where by customers have phones which use the service and the features are provided by AAISP.

SIP is supported across the FireBrick range with the 2500 and 2700 models ideal for Office use and for small VoIP providers, and the 6000 models being used by larger VoIP Providers.

Configuring the FireBrick for SIP

Please see:

This page describes how to configure the FireBrick to work with SIP phones and Carriers. See below on how to then configure phones to register against your FireBrick.

Configuring Phones

Here are notes on configuring various phones with FireBrick VoIP, or view the Generic Instructions.

ALT=Generic Client ALT=Snom M9r ALT=Snom 3xx ALT=Snom 7xx ALT=Linksys ALT=Gigaset 700 and 900 ALT=Gigaset N300
Generic SNOM M9r (IPv6!) SNOM 3xx Series SNOM 7xx Series Linksys Gigaset 700/900 (IPv6!) Gigaset N300
ALT=Grandstream ALT=Sipura ALT=Android SIP ALT=Cisco7xxx Series ALT=Protalk Door Entry Phone Yealink add more?
Grandstream Sipura Android (IPv6!) Cisco 7 series Protalk Door Entry Yealink add more?

Configuring Carriers