This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
Difference between revisions of "FireBrick to Openswan Strongswan IPsec (Howto)"
|[quality revision]||[quality revision]|
m (AA-Andrew moved page FireBrick to Openswan IPsec (Howto) to FireBrick to Openswan Strongswan IPsec (Howto))
Revision as of 14:59, 30 June 2015
yum install openswan
(strongswan is much nicer, but not in yum on centos5. On centos6, use strongswan)
In /etc/ipsec.conf uncomment
Put following two files in /etc/ipsec.d/ :
myFireBrick.conf: conn myFireBrick authby=secret auto=start ikev2=insist left=CentOS.IP.Address leftid=CentOS.IP.Address leftsubnet=CentOS.IP.Address/32 right=FireBrick.IP.Address rightid=FireBrick.IP.Address rightsubnet=FireBrick.LAN.SUBNET/24
CentOS.IP.Address FireBrick.IP.Address : PSK "yourpasswordhere"
chkconfig ipsec on service ipsec start
Put the following in the FB at the other end:
<connection name="IPSec" peer-ips=CentOS.IP.Address" auth-method="Secret" secret="yoursecrethere" internal-ipv4="FireBrick.LAN.IP.Address" routes="CentOS.IP.Address" log="default"/>