Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Firebrick using 3rd party as main connection: Difference between revisions

Firebrick using 3rd party as main connection (view source)

Revision as of 23:58, 17 August 2018

1 byte removed ,  17 August 2018
→‎Adding our route override: clean up, typos fixed: in it's → in its
(Created page with "=Scenario= We have a: * 3rd party 100mbit BT fibre link with locked down router plugged into port 3 of the FireBrick. * ADSL backup from AAISP * FireBrick router *L2TP from A...")
 
(→‎Adding our route override: clean up, typos fixed: in it's → in its)
 
 
=Adding our route override=
Next we will want to create our route override so that we can route traffic down our new tunnel. We will apply our new ping profile to it so that it only enabled if our tunnel is up. You will need to set the ''source-ip=""'' to be our LAN IPs in it'sits CIDR format. You will also want to set the gateway to be our dummy route so that all traffic goes down our tunnel. Make sure you also apply our new profile that we made earlier:
 
<syntaxhighlight lang=shell>
Reedy
editor
698

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/13462’