Mobile IPv6: Difference between revisions

From AAISP Support Site
(Created page with "== Device support == As the modem establishes an IP(v4) [http://en.wikipedia.org/wiki/Packet_Data_Protocol#PDP_Context PDP context] with the network, to do IPv6 the modem would ...")
 
mNo edit summary
 
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
This page is about native IPv6 support on mobile devices.

At the moment (June 2013) AAISPs data SIM service does not support IPv6 natively due to the carrier not supporting it, but tunnelled IPv6 is possible, and means that IPv6 can be used and IPv6 on a DSL line can even fall over to be tunnelled to 3G in the event of a DSL fault.

== Device support ==
== Device support ==


As the modem establishes an IP(v4) [http://en.wikipedia.org/wiki/Packet_Data_Protocol#PDP_Context PDP context] with the network, to do IPv6 the modem would need to support it (or use a full PPP context).
As the modem establishes an IP(v4) [http://en.wikipedia.org/wiki/Packet_Data_Protocol#PDP_Context PDP context] with the network, to do IPv6 the modem would need to support it (or use a full PPP context).


Devices which do/don't support an IPv6 PDP type (there are [http://en.wikipedia.org/wiki/Hayes_command_set AT] commands to query the modem's capabilities:
Devices which do/don't support an IPv6 PDP type (there are [http://en.wikipedia.org/wiki/Hayes_command_set AT] commands to query the modem's capabilities):



=== Huawei E220 (IPv4/PPP) ===

=== Nokia E51 (IPv4/IPv6) ===
'''ATI'''
'''ATI'''
Nokia
'''AT+GCAP'''
+GCAP: +CGSM,+DS,+W
'''AT+CGDCONT=?'''
+CGDCONT: (1-2),"IP",,,(0),(0)
+CGDCONT: (1-2),"IPV6",,,(0),(0)

=== Huawei E220 (IPv4/PPP, IPv4/IPv6/PPP) ===
'''ATI'''
Manufacturer: huawei
Model: E220
Revision: 11.110.01.03.00
Revision: 11.110.01.03.00
+GCAP: +CGSM,+FCLASS,+DS
+GCAP: +CGSM,+FCLASS,+DS
Line 14: Line 33:
+CGDCONT: (1-16),"PPP",,,(0-1),(0-1)
+CGDCONT: (1-16),"PPP",,,(0-1),(0-1)


'''ATI'''
[[Category:Mobile]]
Manufacturer: huawei
Model: E220
Revision: 11.117.10.02.00
+GCAP: +CGSM,+FCLASS,+DS
'''AT+CGDCONT=?'''
+CGDCONT: (1-16),"IP",,,(0-2),(0-4)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-4)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-4)

=== Vodafone (Huawei) K4505 (IPv4/PPP) ===

'''ATI'''
Manufacturer: Vodafone (Huawei)
Model: K4505
Revision: 11.828.03.00.11
+GCAP: +CGSM,+DS,+ES
'''AT+CGDCONT=?'''
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)

=== ZTE MF112 (IPv4/IPv6/PPP) ===
'''ATI'''
Manufacturer: ZTE CORPORATION
Model: MF112
Revision: BD_P671A2V1.0.2B05
+GCAP: +CGSM,+DS,+ES
'''AT+CGDCONT=?'''
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)

=== ZTE MF627 (IPv4/IPv6/PPP) ===
'''ATI'''
Manufacturer: ZTE INCORPORATED
Model: MF626
Revision: BD_P673M3V1.0.1B02
+GCAP: +CGSM,+DS,+ES
'''AT+CGDCONT=?'''
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)

== Network support ==

I (met) have tried connecting with a K4505 and an A&A L2TP-handover SIM using a PPP context, but it doesn't work. An IP context gives you a CONNECT response immediately, with a PPP context it sits there for a couple of seconds before returning NO CARRIER.

I see the same results with a Vodafone contract data SIM.

[[Category:Data SIMs]]

Latest revision as of 13:12, 6 March 2015

This page is about native IPv6 support on mobile devices.

At the moment (June 2013) AAISPs data SIM service does not support IPv6 natively due to the carrier not supporting it, but tunnelled IPv6 is possible, and means that IPv6 can be used and IPv6 on a DSL line can even fall over to be tunnelled to 3G in the event of a DSL fault.

Device support

As the modem establishes an IP(v4) PDP context with the network, to do IPv6 the modem would need to support it (or use a full PPP context).

Devices which do/don't support an IPv6 PDP type (there are AT commands to query the modem's capabilities):


Nokia E51 (IPv4/IPv6)

ATI
Nokia

AT+GCAP
+GCAP: +CGSM,+DS,+W

AT+CGDCONT=?
+CGDCONT: (1-2),"IP",,,(0),(0)
+CGDCONT: (1-2),"IPV6",,,(0),(0)

Huawei E220 (IPv4/PPP, IPv4/IPv6/PPP)

ATI
Manufacturer: huawei
Model: E220
Revision: 11.110.01.03.00
+GCAP: +CGSM,+FCLASS,+DS

AT+CGDCONT=?
+CGDCONT: (1-16),"IP",,,(0-1),(0-1)
+CGDCONT: (1-16),"PPP",,,(0-1),(0-1)
ATI
Manufacturer: huawei
Model: E220
Revision: 11.117.10.02.00
+GCAP: +CGSM,+FCLASS,+DS

AT+CGDCONT=?
+CGDCONT: (1-16),"IP",,,(0-2),(0-4)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-4)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-4)

Vodafone (Huawei) K4505 (IPv4/PPP)

ATI
Manufacturer: Vodafone (Huawei)
Model: K4505
Revision: 11.828.03.00.11
+GCAP: +CGSM,+DS,+ES

AT+CGDCONT=?
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)

ZTE MF112 (IPv4/IPv6/PPP)

ATI
Manufacturer: ZTE CORPORATION
Model: MF112
Revision: BD_P671A2V1.0.2B05
+GCAP: +CGSM,+DS,+ES

AT+CGDCONT=?
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)

ZTE MF627 (IPv4/IPv6/PPP)

ATI
Manufacturer: ZTE INCORPORATED
Model: MF626
Revision: BD_P673M3V1.0.1B02
+GCAP: +CGSM,+DS,+ES

AT+CGDCONT=?
+CGDCONT: (1-16),"IP",,,(0-2),(0-3)
+CGDCONT: (1-16),"PPP",,,(0-2),(0-3)
+CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)

Network support

I (met) have tried connecting with a K4505 and an A&A L2TP-handover SIM using a PPP context, but it doesn't work. An IP context gives you a CONNECT response immediately, with a PPP context it sits there for a couple of seconds before returning NO CARRIER.

I see the same results with a Vodafone contract data SIM.