OpenWRT routers: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
OpenWRT can be configured using the shell commands when accessing the router with ssh or a serial console. This uses the Unified Configuration Interface [https://openwrt.org/docs/guide-user/base-system/uci (UCI) commands]. You can also edit the configuration files directly, though there is no verification of settings made via this route, use with caution. There is also a web based configuration management system that can be run if you have sufficient memory and resources. The [https://openwrt.org/docs/techref/luci LuCI web configuration] system may need [https://openwrt.org/docs/guide-user/base-system/uci to be installed] onto the base system. |
OpenWRT can be configured using the shell commands when accessing the router with ssh or a serial console. This uses the Unified Configuration Interface [https://openwrt.org/docs/guide-user/base-system/uci (UCI) commands]. You can also edit the configuration files directly, though there is no verification of settings made via this route, use with caution. There is also a web based configuration management system that can be run if you have sufficient memory and resources. The [https://openwrt.org/docs/techref/luci LuCI web configuration] system may need [https://openwrt.org/docs/guide-user/base-system/uci to be installed] onto the base system. |
||
= Securing the Router = |
|||
OpenWRT is a very secure operating system. This is the result of the open nature of the development process. Many eyes mean that all bugs are shallow, and and problems that are found are fixed quickly as there is no opaque company that has to do the development. But you should do the basic steps to your new installation of changing the base password to a long complex one ideally one generated by your password manager. |
|||
= Configuring the WAN interface to access AAISP = |
= Configuring the WAN interface to access AAISP = |
||
| Line 9: | Line 13: | ||
= Enabling IPv6 in the local network = |
|||
| ⚫ | |||
OpenWRT fully supports IPv6, as well as IPv4 and dual stacks to enable the mix of both protocols. |
|||
| ⚫ | |||
Revision as of 20:36, 20 December 2023
Overview
OpenWRT is an open source operating system specifically designed for Routers. It was originally released by Linksys as the firmware for the WRT54G series of routers that use software licenced under the GPL. The software has been modified from this point and is available for many brands of router, and is supplied as the firmware on others.
OpenWRT can be configured using the shell commands when accessing the router with ssh or a serial console. This uses the Unified Configuration Interface (UCI) commands. You can also edit the configuration files directly, though there is no verification of settings made via this route, use with caution. There is also a web based configuration management system that can be run if you have sufficient memory and resources. The LuCI web configuration system may need to be installed onto the base system.
Securing the Router
OpenWRT is a very secure operating system. This is the result of the open nature of the development process. Many eyes mean that all bugs are shallow, and and problems that are found are fixed quickly as there is no opaque company that has to do the development. But you should do the basic steps to your new installation of changing the base password to a long complex one ideally one generated by your password manager.
Configuring the WAN interface to access AAISP
Enabling IPv6 in the local network
OpenWRT fully supports IPv6, as well as IPv4 and dual stacks to enable the mix of both protocols.