Editor
5
edits
OpenWRT routers: Difference between revisions
vlan config for diffrent networks.
(Updated with the vlan configurations.) |
(vlan config for diffrent networks.) |
||
|
In order to access AAISP, the router needs to talk PPPoE over the WAN interface. IPCP will configure IPv4, and then IP6CP will start to configure IPv6. The heavy lifting of IPv6 configuration will be done by DHCPv6.
In the vlan configuration the value of '''vid''' will depend on your connection method. Use '''911''' if you are connected using City Fiber, '''101''' for VDSL connections. For Openreach FTTP the vlan is not needed. If you are on the ADSL then and ADSL modem is required and this is usually not supported on OpenWRT devices. See the [[General_Router_Settings|General Router Settings]] page for details.
The appropriate entries in ''/etc/config/network'' will look like:
| |||