editor
698
edits
Openreach FTTP ONT: Difference between revisions
→LED Status: rm trailing . from table
(→LED Status: s/not/no/) |
(→LED Status: rm trailing . from table) |
||
|
| Blinking/Flashing || Data being transmitted || '''Good'''
|-
|rowspan="3"| '''LOS''' (Loss of service)<br>'''PON''' (Passive Optical Network) || PON green, LOS off || Connected and should be working || '''Good'''. This is how it should be normally
|-
| PON flashing green, LOS off || ONT is starting up || '''Wait''' a bit for steady green and all should be well...
|-
| PON off, LOS red || Possible fault with the fibre || '''Bad'''. Check fibre not damaged, reconnect fibre, power cycle ONT
|-
|rowspan="2"| '''POWER''' || Green || Device has power || '''Good'''
|-
| Off || Power is off || '''Bad'''. Check mains power and connection to BBU/ONT
|-
! colspan=6 | Bottom right (BBU) LEDs
|'''STATUS''' || Green || || '''Good'''
|-
|'''FAULT''' || Red || Battery fault || '''Bad'''. Replace the AA batteries inside
|-
|rowspan="2"|'''CHARGING''' || Orange || || '''Wait'''; the batteries are charging (usually after a power cut)
|-
| Off || || '''Good'''. The batteries are fully charged
|}
| |||