Openreach FTTP ONT: Difference between revisions

Back up to the Routers Category
From AAISP Support Site
(→‎LED Status: Sub headings)
mNo edit summary
(42 intermediate revisions by 2 users not shown)
Line 1: Line 1:
__NOTOC__<indicator name="Routers">[[File:menu-router.svg|link=:Category:Routers|30px|Back up to the Routers Category]]</indicator>
__NOTOC__<indicator name="Routers">[[File:menu-router.svg|link=:Category:Routers|30px|Back up to the Routers Category]]</indicator>


[[Category:FTTP Faults]]
[[File:ont.png|thumb|Openreach ONT with BBU in enclosure]]
[[Category:Routers]]


[[File:Fttp-ont-pon.jpg|thumb|(Newer) Openreach single port ONT - Lights show all good]]
This page is about the FTTP termination device that Openreach install for FTTP customers.
[[File:Older_ONT.png|thumb|(Older) Openreach ONT - Lights show all good]]


Older Openreach ONT (Optical Network Termination) such as the one pictured, is actually inside the enclosure. This also contains a Battery Backup Unit (BBU) along with various wiring and cable management.


[[File:Ont-ports.png|thumb|(Newer) Openreach single port ONT ports]]
Newer ONT installs do not include the BBU, and are also not in a larger enclosure.
[[File:ONT-side.jpg|thumb|(Older) Openreach ONT, powered off!]]
[[File:Nte-ok.jpg|thumb|(Older) Openreach ONT, powered on and working OK]]
[[File:ONT-opened.jpg|thumb|(Older) Openreach ONT, cover removed. Customer router connects to yellow socket]]


This page is about the FTTP termination device that Openreach install for FTTP customers. ONT stands for Optical Network Terminal, sometimes (mistakenly) called an openreach modem. CityFibre use a different ONT - we have a separate page on that: [[CityFibre ONT]]
The ONT requires power, so will need a mains power socket nearby.


=Summary:=
=LED Status=

* In short, the ONT in installed inside the customer's premises by CityFibre and converts the fibre connection from the outside world in to a RJ45 port which you plug in to your router with a CAT5 cable.
* The ONT requires power, and a UPS is recommended, see our [[VoIP_Power]] page for suggestions.

Openreach provide an ONT for use with FTTP services. - so when you order a BT-based FTTP service from A&A, an Openreach engineer will install the little ONT unit in your premises. You then connect your Ethernet router to it and set your router with the A&A PPP credentials to log in.

This page is about diagnosing problems with the Openreach ONT.

* A working Openreach unit has '''green: power, PON & LAN''' lights, anything else indicates a problem.
* Your PPPoE capable router will plug in to the LAN port and connect you to the internet.

=More info=

* Newer ONT installs do not include a Battery Backup Unit (BBU) See: [[999_and_faults]]
* Older Openreach ONT (Optical Network Termination) such as the one pictured, is actually inside the enclosure. This also contains a Battery Backup Unit (BBU) along with various wiring and cable management.
* The ONT requires power, so will need a mains power socket nearby.
* Where provided, the battery has a short warranty, and should be maintained by the end user, however, the battery is to keep the unit powered so that the TEL ports can be used during a power outage - we don't use the TEL ports, so you will want to make other arrangements for using a phone during a power outage - eg a mobile phone. See: [[999_and_faults]]

== Openreach ONT LED Status ==


{| class="wikitable"
{| class="wikitable"
Line 18: Line 41:
! LED !! Colour !! Meaning !! Notes
! LED !! Colour !! Meaning !! Notes
|-
|-
! colspan=4 | Top LEDs
! colspan=4 | Top (ONT) LEDs
|-
|-
| '''TEL1''' || || || We don't use the Tel ports
| '''TEL1''' || Off || || We don't use the Tel ports
|-
|-
|rowspan="2"| '''PORT1''' || Off || ONT has not ethernet link to the router || '''Bad'''. Check the connection/cable to the router
| rowspan=2 | '''PORT1''' or '''LAN''' || Blinking/Flashing green || Data being transmitted || '''Good'''
|-
|-
| Off || ONT has no ethernet link to the router || '''Bad'''. Check the connection/cable to the router
| Blinking/Flashing || Data being transmitted || '''Good'''
|-
|-
|rowspan="3"| '''LOS''' (Loss of service)<br>'''PON''' (Passive Optical Network) || PON green, LOS Off || Connected and should be working || '''Good'''. This is how it should be normally
| rowspan=3 | '''LOS''' (Loss of service)<br><br>'''PON''' (Passive Optical Network) || PON solid green, LOS off || Connected and should be working || '''Good'''. This is how it should be normally
|-
|-
| PON flashing green, LOS off || ONT is starting up || '''Wait''' a bit for steady green and all should be well...
| PON flashing green, LOS off || ONT is starting up || '''Wait''' a bit for steady green and all should be well...
|-
|-
| PON off, LOS red || Possible fault with the fibre || '''Bad'''. Check fibre not damaged, reconnect fibre, power cycle ONT
| PON off, LOS solid red || Possible fault with the fibre || '''Bad'''. Check fibre not damaged, reconnect fibre, power cycle ONT
|-
|-
|rowspan="2"| '''Power''' || Green || Device has power || '''Good'''
| rowspan=2 | '''POWER''' || Solid green || Device has power || '''Good'''
|-
|-
| Off || Power is off || '''Bad'''. Check mains power
| Off || Power is off || '''Bad'''. Check mains power and connection to BBU/ONT
|-
|-
! colspan=4 | Bottom right LEDs
! colspan=6 | Bottom right (BBU) LEDs
|-
|-
| rowspan=2 | '''STATUS''' || Solid green || || '''Good'''
|'''Status/Fault/Charging''' || || Related to the battery backup || The 'fault' LED indicated a fault with the battery, and not related to a fault with the FTTP service.
|-
| Off || ||
|-
| rowspan=2 | '''FAULT''' || Solid red || Battery fault || '''Bad'''. Replace the AA batteries inside
|-
| Off || || '''Good'''. No fault
|-
| rowspan=2 | '''CHARGING''' || Solid orange || Batteries are not fully charged || '''Wait'''; the batteries are charging (usually after a power cut)
|-
| Off || Batteries are not being charged || '''Good'''. The batteries are fully charged
|}
|}

== External links ==
* [https://www.openreach.com/content/dam/openreach/openreach-dam-files/images/news-and-opinion/articles/2018/02/ONT%20Factsheet.pdf 1+1 ONT and Enclosure Factsheet]

Revision as of 09:23, 18 April 2023


(Newer) Openreach single port ONT - Lights show all good
(Older) Openreach ONT - Lights show all good


(Newer) Openreach single port ONT ports
(Older) Openreach ONT, powered off!
(Older) Openreach ONT, powered on and working OK
(Older) Openreach ONT, cover removed. Customer router connects to yellow socket

This page is about the FTTP termination device that Openreach install for FTTP customers. ONT stands for Optical Network Terminal, sometimes (mistakenly) called an openreach modem. CityFibre use a different ONT - we have a separate page on that: CityFibre ONT

Summary:

  • In short, the ONT in installed inside the customer's premises by CityFibre and converts the fibre connection from the outside world in to a RJ45 port which you plug in to your router with a CAT5 cable.
  • The ONT requires power, and a UPS is recommended, see our VoIP_Power page for suggestions.

Openreach provide an ONT for use with FTTP services. - so when you order a BT-based FTTP service from A&A, an Openreach engineer will install the little ONT unit in your premises. You then connect your Ethernet router to it and set your router with the A&A PPP credentials to log in.

This page is about diagnosing problems with the Openreach ONT.

  • A working Openreach unit has green: power, PON & LAN lights, anything else indicates a problem.
  • Your PPPoE capable router will plug in to the LAN port and connect you to the internet.

More info

  • Newer ONT installs do not include a Battery Backup Unit (BBU) See: 999_and_faults
  • Older Openreach ONT (Optical Network Termination) such as the one pictured, is actually inside the enclosure. This also contains a Battery Backup Unit (BBU) along with various wiring and cable management.
  • The ONT requires power, so will need a mains power socket nearby.
  • Where provided, the battery has a short warranty, and should be maintained by the end user, however, the battery is to keep the unit powered so that the TEL ports can be used during a power outage - we don't use the TEL ports, so you will want to make other arrangements for using a phone during a power outage - eg a mobile phone. See: 999_and_faults

Openreach ONT LED Status

Openreach ONT LED Status
LED Colour Meaning Notes
Top (ONT) LEDs
TEL1 Off We don't use the Tel ports
PORT1 or LAN Blinking/Flashing green Data being transmitted Good
Off ONT has no ethernet link to the router Bad. Check the connection/cable to the router
LOS (Loss of service)

PON (Passive Optical Network)
PON solid green, LOS off Connected and should be working Good. This is how it should be normally
PON flashing green, LOS off ONT is starting up Wait a bit for steady green and all should be well...
PON off, LOS solid red Possible fault with the fibre Bad. Check fibre not damaged, reconnect fibre, power cycle ONT
POWER Solid green Device has power Good
Off Power is off Bad. Check mains power and connection to BBU/ONT
Bottom right (BBU) LEDs
STATUS Solid green Good
Off
FAULT Solid red Battery fault Bad. Replace the AA batteries inside
Off Good. No fault
CHARGING Solid orange Batteries are not fully charged Wait; the batteries are charging (usually after a power cut)
Off Batteries are not being charged Good. The batteries are fully charged

External links