Pfsense bonding: Difference between revisions

From AAISP Support Site
(Created page with "==Full bonding with pfSense== [http://pfsense.org pfSense] From version 2.0.1, it's possible to configure pfSense for policy-based routing and fallback over multiple WAN conn...")
 
mNo edit summary
Line 4: Line 4:
From version 2.0.1, it's possible to configure pfSense for policy-based routing and fallback over multiple WAN connections. One AAISP customer runs this with two AAISP ADSL lines, switching to an AAISP SIM card if both lines fail - see his [http://blog.martinshouse.com/2012/01/multi-wan-multi-lan-no-nat-routing-with.html blog entry] for details. However, pfSense does not yet have IPV6 support, and (as of 2.0.1) the recovery from fallback might not always work perfectly.
From version 2.0.1, it's possible to configure pfSense for policy-based routing and fallback over multiple WAN connections. One AAISP customer runs this with two AAISP ADSL lines, switching to an AAISP SIM card if both lines fail - see his [http://blog.martinshouse.com/2012/01/multi-wan-multi-lan-no-nat-routing-with.html blog entry] for details. However, pfSense does not yet have IPV6 support, and (as of 2.0.1) the recovery from fallback might not always work perfectly.


[[Category:Bonding]]
[[Category:Bonding Configuration]]

Revision as of 09:45, 20 March 2015

Full bonding with pfSense

pfSense

From version 2.0.1, it's possible to configure pfSense for policy-based routing and fallback over multiple WAN connections. One AAISP customer runs this with two AAISP ADSL lines, switching to an AAISP SIM card if both lines fail - see his blog entry for details. However, pfSense does not yet have IPV6 support, and (as of 2.0.1) the recovery from fallback might not always work perfectly.