Router:Linux - Debian: Difference between revisions

Router:Linux - Debian (view source)

291 bytes added , 13 September 2020

m

Fixing buster typos, and mentioning that this works with jessie, stretch and buster.

51

edits

Revision as of 00:17, 18 August 2018 (view source) Reedy (talk \| contribs) (clean up, typos fixed: negotation → negotiation, the the → the) ← Older edit		Latest revision as of 10:56, 13 September 2020 (view source) TomJepp (talk \| contribs) m (Fixing buster typos, and mentioning that this works with jessie, stretch and buster.)
(One intermediate revision by one other user not shown)
You'll need to use an ADSL or FTTC modem in bridge mode for this to work - see the page for your modem to see how to set that up. This guide provides an example configuration for Debian Jessie, but it should largely work for future versions. This has been tested with Jessie, Stretch and Buster. = Prerequsites = * a Linux PC with Debian ~~Jessie~~ already installed and two network interfaces - one for the connection to the modem, and one for the connection to your LAN * a ADSL or FTTC modem, or a fibre ONT (for FTTP) (as appropriate for your connection) * '''eth0''' is plugged directly into your modem or ONT * '''eth1''' will be used for your LAN Note that under Buster, you can expect naming conventions for the interfaces to be different, you'll therefore have to pay close attention to updating the interface names as you follow the guide. = Enabling IP forwarding =