Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

RouterOS bonding: Difference between revisions

RouterOS bonding (view source)

Revision as of 21:54, 8 August 2013

462 bytes added ,  8 August 2013
m
no edit summary
mNo edit summary
mNo edit summary
 
''Info below is submitted by a customer:''
 
 
==Notes from AAISP==
*If you are NATing, then ask support to set you up with a SINGLE WAN IP that is routed to all of your lines. That way, the download will be bonded from the AAISP end, and your routerboard will route traffic up all the lines and AAISP won't source filter.
*In most cases AAISP can provide a block of IP4 addresses, so you don't need to NAT.
*AAISP support bonding IPv6 in the same way as a block of IPv4
 
 
==Notes from the Customer setup==
 
My set up -
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,270

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/4122’