7
edits
Router - Cisco IPv6 Native Config: Difference between revisions
Router - Cisco IPv6 Native Config (view source)
Revision as of 13:49, 2 November 2011
, 2 November 2011→Enable IPv6 to work on your WAN side
|
The above config didn't work for me I had to create a new /64 via Clueless and add this here as an IP address
<pre>
#ipv6 nd prefix <your_slash_64>::1/64
</pre>
I would also add the following traffic-filter to the dialer interface
<pre>
#ipv6 traffic-filter outboundfilters-ipv6 out
</pre>
== Lock down your IPv6 network with an access list ==
| |||