Router - Cisco IPv6 Native Config: Difference between revisions
(Created page with "= This page will walk you through getting IPv6 to work correctly on your Cisco device = == Enable IPv6 routing on your router == <pre> #conf t #ipv6 source-route #ipv6 unicast-...") |
(No difference)
|
Revision as of 21:58, 7 February 2011
This page will walk you through getting IPv6 to work correctly on your Cisco device
Enable IPv6 routing on your router
#conf t #ipv6 source-route #ipv6 unicast-routing #ipv6 cef #ipv6 multicast-routing #ipv6 route ::/0 Dialer0
Enable IPv6 to work on your internal Ethernet Ports
#conf t #interface FastEthernet 0/0 #ipv6 address <your_slash_48>:1::/64 eui-64 #ipv6 enable #ipv6 nd prefix <your_slash_48>:1::/64 #ipv6 nd managed-config-flag #ipv6 nd router-preference High #ipv6 nd ra interval 60
Enable IPv6 to work on your WAN side
#conf t #interface dialer0 #ipv6 enable #ipv6 traffic-filter adsl-ipv6 in
Lock down your IPv6 network with an access list
#conf t #ipv6 access-list ipv6 adsl-ipv6 #permit tcp any any established #permit icmp any any #deny ipv6 any any #interface dialer0 #ipv6 traffic-filter adsl-ipv6 in