Revision as of 15:14, 6 December 2017 (view source) CecilWard (talk \| contribs) m (→‎Initial setup using the web admin interface) ← Older edit		Revision as of 15:15, 6 December 2017 (view source) CecilWard (talk \| contribs) m (→‎Notes) Newer edit →
It is vital that you <b>not expose the LAN-side ethernet interface to users on the LAN</b> unless all possible users and devices on the LAN are trusted because of various critical security bugs in this respect. Because of such bugs, setting passwords on the modem’s admin web UI etc is not enough. If your router happens to prevent LAN-internal users from accessing the modem then so much the better, otherwise your main router’s facilities / internal firewalling and access controls should be explored. Chipset: The currently shipping DSL-320B-Z1 units (at the time of writing, December 2017), and those shipped from approx 2015 onwards, use an old but capable MediaTek/TrendChip chipset. The older -D1 routers were Broadcom-based. *Incorrect manufacturer’s defaults: The default settings shown in the router’s web admin user interface show <b>defaults that are questionable</b>. ~~See~~These settings should be fixed - see following section. == Initial setup using the web admin interface ==

Router - DLINK 320B (view source)