252
edits
Router - DLINK 320B: Difference between revisions
→Rear view of obsolete ‑D1 modem: Image of modern modem added, to bring page up-to-date
m (→Initial setup using web admin i/f for the DSL-320B-Z1: header level) |
(→Rear view of obsolete ‑D1 modem: Image of modern modem added, to bring page up-to-date) |
||
|
''Performance tip for long lines:'' If you have an extremely long phone line (>60 dB downstream attenuation) and you can use ADSL2+, it is worthwhile experimenting with setting the DSL mode/standard option to ‘ADSL 2’ (only) in the above list of options, that is, taking ADSL2+ out of the list of allowed standards, as opposed to allowing the modem to use ADSL2+, to see if this restriction gives a performance improvement. It will be a long process to get a meaningful comparison with take many restarts and many tests to confirm any possible performance difference between allowing and disallowing ADSL2+. If in any doubt enable ADSL2+ ie ADSL1/ADSL2/ADSL2+ ‘auto’ mode where the modem will use ADSL2+ (which can support much higher best-case speeds than ADSL2) if the exchange DSLAM or MSAN supports ADSL2+ too.
== Images ==
=== DLink DSL-320B-Z1 modem ===
[[ Image:Dlink-dsl-320b-z1-rearview.png | png | left | 800px |
The currently shipping (as of December 2017) DLink DSL-320B-Z1 modem, rear view]]
=== Rear view of obsolete ‑D1 modem ===
The image below is of the older generation of routers.
<div title="Rear view of obsolete pre-Z1 modem showing blanked-off reset button">▼
▲[[File:DLINK_320B-reset.jpg|500px]]
[[Category:AA Routers|Dlink]]
| |||