252
edits
Router - DLINK 320B: Difference between revisions
m
→After each reset to factory settings: fixed a problem where wiki engine made a useless link to 192.168.*.*
(→After each reset to factory settings: wording more accurate as based on pic at http://www.dlink.com/uk/en/support/faq/modems/dsl-modems/dsl_320b/how-to-setup-dsl-320b-revision-z1-in-bridge-mode) |
m (→After each reset to factory settings: fixed a problem where wiki engine made a useless link to 192.168.*.*) |
||
|
== After each reset to factory settings ==
<p id="post-factory-reset">
After any reset to factory settings you will need to make the following change using the web admin user interface in order to get the device to work properly as a straight modem. (Factory default <code><nowiki>http://192.168.1.1</nowiki></code>, and your own ip address set to something suitable in that same /24 subnet, username=admin, password=admin.)</p>
Go to “Setup” and “ADSL Setup” and there tick “Manual Setup”. Then tick “Bridge Mode”. The “Connection Type” should show “1483 Bridged IP LLC". See also article at [http://www.dlink.com/uk/en/support/faq/modems/dsl-modems/dsl_320b/how-to-setup-dsl-320b-revision-z1-in-bridge-mode bridge mode setup article at Dlink website].
| |||