252
edits
Router - DLINK 320B: Difference between revisions
→Notes: tr-069 wording
(→Resetting to factory settings: improved factory reset instructions) Tags: Mobile edit Mobile web edit |
(→Notes: tr-069 wording) Tags: Mobile edit Mobile web edit |
||
|
*The modems support the ADSL standards G.992.1/G.DMT (‘ADSL1’), G.992.3 (ADSL2) and G.992.5 (ADSL2+) and can either auto-detect the best mode or lock it to just one option. Annex M is supported. SRA is also supported.
*VDSL2 is not supported, so these devices cannot be used with FTTC.
*TR-069 is not supported
*It is vital that you <b>not expose the LAN-side ethernet interface to users on the LAN</b> unless all possible users and devices on the LAN are trusted because of various critical security bugs in the modem in this respect. Because of such bugs, setting passwords on the modem’s admin web UI etc is ''not enough''. If your router happens to prevent LAN-internal users from accessing the modem then so much the better, otherwise your main router’s facilities, internal firewalling and access controls could be exploited. A firmware upgrade to release v1.06 or higher could well help fix security problems concerning access without any administrative login. [ftp://ftp.dlink.eu/Products/dsl/dsl-320b/driver_software/DSL-320B_fw_revZ1_1-06_EU_multi_20150807.zip Firmware v1.06]
*Chipset: The currently shipping DSL-320B-Z1 units (at the time of writing, December 2017) use an old but capable MediaTek/TrendChip chipset. The older “-D1” routers were Broadcom-based.
| |||