Difference between revisions of "Router - PFSense (beta 2.1)"

Jump to navigation Jump to search
[unchecked revision][unchecked revision]
* Set the IPv6 configuration type on your PPPoE interface to DHCPv6
* Set the IPv6 on LAN to <your /64 range>::1 (it doesn't have to be 1) and the mask to 64. eg 2001:8b0:fc5c:6a01::1.
* Services -> DHCPv6 Server/RA. Set theRouter top drop downAdvertisements to Unmanaged and save.
Have a look at the addresses on your PC ("ip a"/"ifconfig"/"ipconfig /all") and you should find that you now have a global IPv6 address assigned. It will start with the /64 prefix from above.
If you have additional interfaces then simply add another /64 on your AAISP control page and then set the IPv6 address to <another one of your /64s>::1. Then set theRA DHCPv6to serverunmanaged toas above for that Unmanaged.interface
Unmanaged really means use "radvd" ie auto addressing based on subnet and MAC address. There are several other options and these are described nicely on the page but unmanaged gets you up and running quickly.