Revision as of 20:48, 23 April 2014 (view source) Camlin (talk \| contribs) (→‎Vigor) ← Older edit		Revision as of 20:49, 23 April 2014 (view source) Camlin (talk \| contribs) (→‎Vigor) Newer edit →
Now, it could still be an idea to check the settings and change the default password. In which case, just plug the Vigor into a PC, point a browser at it (typically will be listening on 192.168.1.1) and follow the user docs. If you check the web front end, make sure that it gets SHOWTIME for ADSL (otherwise it means you have a problem with the ADSL connection to start with). Typically you will be trying to setup the modem in bridge mode so that it receives the PPoE on the NIC port and then pushes that over the ADSL connection (via PPoA, using the usual Mux VC ~~38/~~0/38). In the case of the [[Vigor 120]], the configuration will look like this:

Router - PFSense v2.1.2+ (view source)