Revision as of 19:58, 24 April 2014 (view source) Camlin (talk \| contribs) (→‎Vigor) ← Older edit		Revision as of 20:08, 24 April 2014 (view source) Camlin (talk \| contribs) No edit summary Newer edit →
''Note: Interestingly, I tried the RFC1483 mode and it seems to work ok too (although when I do, pfSense then seems to be taking to an Ericsson box instead of the usual Cisco one).'' == Dlink DSL-320B == I also tried with a Dlink DSL-320B modem and it worked fine too although it had to be setup in RFC1483 IP LLC bridge mode and the default VCI number had to be changed to 38 (there did not seem to be any PPoE passthrough option over PPoA). Now, even in bridge mode, it will still be an idea to change the default admin password and disable management services on the WAN side. ''Note: The default LAN address was changed to 192.168.100.1 in order to avoid any potential conflicts with the internal network that is behind pfSense.'' == REST OF WIKI PAGE STILL TO BE DONE... ==

Router - PFSense v2.1.2+ (view source)