Router - RouterOS and Routerboard: Difference between revisions

Router - RouterOS and Routerboard (view source)

20 bytes added , 28 August 2018

m

→‎Default Config: extremely minor corrections

252

edits

Revision as of 00:17, 18 August 2018 (view source) Reedy (talk \| contribs) (→‎Next Steps, Bonding a Second, or multiple Lines: clean up) ← Older edit		Revision as of 02:43, 28 August 2018 (view source) CecilWard (talk \| contribs) m (→‎Default Config: extremely minor corrections) Newer edit →
(2 intermediate revisions by the same user not shown)
Here we will build a basic configuration for RouterOS/Routerboard. The examples are relevant for ADSL (Be and BT) as well as FTTC/FTTP through AAISP. With the exception of IPv6, the examples shown should work on any stable release. IPv6 requires versions prior to ~~and~~or including 3.17 or version 5.0rc7 onwards. We have an AAISP ADSL line with the following details: *Routed IPv6 block = 2001:DB8::/48 (we will allocate 2001:DB8::/64 to the router) Note that the IPv4 block 192.0.2.0/24 and the IPv6 block 2001:DB8::/32 are special blocks reserved for documentation (~~rfc5737~~RFC5737 and ~~rfc3849~~RFC3849). Also note that A&A ~~supply~~supplies a /48 block of ~~IPv6s~~IPv6 addresses by default and this example will only use the first /64 in this block. = Default ~~Config~~Configuration = This example assumes that the router is at its default configuration with any example/demo/supplied settings removed. ~~Further~~Furthermore, it is assumed that your WAN (ADSL/VDSL/whatever modem) is plugged into interface 'ether1' and LAN into 'ether2'. = Configuring Initial Basic Settings =