editor
698
edits
Router - TG582N - Adding support for a 3G dongle: Difference between revisions
Router - TG582N - Adding support for a 3G dongle (view source)
Revision as of 00:18, 18 August 2018
, 18 August 2018clean up, typos fixed: usb → USB (3)
(Add testing a new dongle) |
(clean up, typos fixed: usb → USB (3)) |
||
| (5 intermediate revisions by 2 users not shown) | |||
|
modeswitch string, and the ZTE MF100 and MF110 entries only differ in the USB IDs. So for the MF112 it's worth trying to copy those entries
but modifying the USB IDs.
[ In fact, the modem USB ID for the ZTE MF112 is the same (19d2:0031) as for the already supported ZTE_MF627 - so once the TG582n detects the
MF112 in storage mode and mode switches the device, then the TG582n detects the dongle as a ZTE MF627 ].
== Finding the config from the Internet ==
There are several external sites to consult in case someone else has already worked out the data for the new dongle:
* [http://forums.modem-help.co.uk/viewtopic.php?t=11342 modem-help.co.uk ]
* [http://www.draisberghof.de/usb_modeswitch/device_reference.txt USB modeswitch "known working hardware" list ]
* [http://www.dd-wrt.com/wiki/index.php/Mobile_Broadband dd-wrt.com ]
= Adding a new dongle =
different numbers.
Once the dongle is recognised, the next step is to configure the 3G service ([[
works. On the web interface 'Broadband Connection' should show the mobile broadband connection, and 'View More' should show operator
and signal strength info - if the signal strength info is missing, the 'AT interface' might be wrongly configured.
[[Category:Router TG582N|3G]]
| |||