Router - TG582N - Adding support for a 3G dongle: Difference between revisions

Router - TG582N - Adding support for a 3G dongle (view source)

454 bytes added , 18 August 2018

clean up, typos fixed: usb → USB (3)

editor

698

edits

Revision as of 18:04, 26 January 2015 (view source) Adsb (talk \| contribs) m (Mention that an existing modem USB ID might be used) ← Older edit		Latest revision as of 00:18, 18 August 2018 (view source) Reedy (talk \| contribs) (clean up, typos fixed: usb → USB (3))
(4 intermediate revisions by 2 users not shown)
[ In fact, the modem USB ID for the ZTE MF112 is the same (19d2:0031) as for the already supported ZTE_MF627 - so once the TG582n detects the MF112 in storage mode and mode switches the device, then the TG582n detects the dongle as a ZTE MF627 ]. == Finding the config from the Internet == There are several external sites to consult in case someone else has already worked out the data for the new dongle: * [http://forums.modem-help.co.uk/viewtopic.php?t=11342 modem-help.co.uk ] * [http://www.draisberghof.de/usb_modeswitch/device_reference.txt USB modeswitch "known working hardware" list ] * [http://www.dd-wrt.com/wiki/index.php/Mobile_Broadband dd-wrt.com ] = Adding a new dongle = different numbers. Once the dongle is recognised, the next step is to configure the 3G service ([[~~Router_~~Router -~~_TG582N_~~ TG582N -~~_3G~~ 3G\|3G]]) and then see if mobile broadband works. On the web interface 'Broadband Connection' should show the mobile broadband connection, and 'View More' should show operator and signal strength info - if the signal strength info is missing, the 'AT interface' might be wrongly configured. [[Category:Router TG582N\|3G]]