Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Router - TG582N - Adding support for a 3G dongle: Difference between revisions

Router - TG582N - Adding support for a 3G dongle (view source)

Revision as of 23:19, 24 January 2015

477 bytes added ,  24 January 2015
Try copying some data from a supported dongle
m (Mention that disabling mode switching might cause problems using the dongle under Windows)
(Try copying some data from a supported dongle)
Armed with the USB ID(s) it's time to hope that someone else has already found the remaining data. Let's go searching.
 
== Luck ==
As an aside, weWe've just been lucky with the ZTE MF112 - its 'storage ID' of 19d2:0103 isn't in the list of supported dongles, but with mode switching disabled the 'modem ID' of 19d2:0016 '''is''' in that list (appearing as the ZTE_MF110). Plugging the ZTE MF112 in, having first disabled mode switching, results in
:mobile device list
reporting at the end
AT interface : 1
Data interface: 2
 
== Copying from a similar entry ==
It may be the case that a new dongle has similar USB ID(s) to a supported dongle from the same manufacturer. If so it would be worthwhile
trying most of the data from the supported dongle, but with the new USB ID(s). For example, the supported ZTE dongles all use the same
modeswitch string, and the ZTE MF100 and MF110 entries only differ in the USB IDs. So for the MF112 it's worth trying to copy those entries
but modifying the USB IDs.
 
= Adding a new dongle =
Adsb
editor
471

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/6680’