Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Router - TP-Link - TD-W9980: Difference between revisions

m
clean up, typos fixed: ie, → i.e.,, 100Mbps → 100Mbit/s (3)
m (clean up, typos fixed: ie, → i.e.,, 100Mbps → 100Mbit/s (3))
 
=Specs=
 
*VDSL2/ADSL2+ Modem Router, supporting up to 100Mbps100Mbit/s broadband speeds.
*Simultaneous 2.4GHz4 GHz 300Mbps300Mbit/s and 5GHz5 GHz 300Mbps300Mbit/s WiFi.
*4 Gigabit Ports.
*Ethernet WAN (EWAN) for connecting to VDSL/ADSL modems.
#Select ISP - From ISP List choose "ADSL_BT", click "Next".
#PPPoA - Enter broadband username and password, click "Next".
#Wireless 2.4GHz4 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Wireless 5GHz5 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Confirm - Check settings then click "Save".
 
#Select ISP - From ISP List choose "VDSL_AAISP", click "Next".
#PPPoE - Enter broadband username and password, click "Next".
#Wireless 2.4GHz4 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Wireless 5GHz5 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Confirm - Check settings then click "Save".
 
#Ethernet WAN Type - Choose "PPPoE", click "Next".
#PPPoE - Enter broadband username and password, click "Next".
#Wireless 2.4GHz4 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Wireless 5GHz5 GHz - Change WiFi SSID and Password (Optional), click "Next".
#Confirm - Check settings then click "Save".
 
#Click "Add".
#DSL Modulation Type: VDSL
#Enable VLAN ID: ✓
#VLAN ID: 101
#Connection Type: Bridge
 
==Bridging Notes==
#Firmware TD-W9980_V1_150507 07/05/15 does not support *at least* 1508 byte frames so as to allow RFC4638 PPPoE to a connected device. iei.e., 1500 byte MTU is not possible when in bridge mode.
#*AAISP contacted TP-Link regarding this 2015-09-12
 
[[Category:3rd_Party_Routers3rd Party Routers|TP Link]]
editor
698

edits