SIP2SIM Technical: Difference between revisions

← Older edit

SIP2SIM Technical (view source)

Revision as of 23:54, 18 December 2018

2 bytes added , 18 December 2018

m

Make it clearer that DNS provides SRV records

Adsb

editor

471

edits

Revision as of 14:03, 30 June 2015 (view source) AA-Andrew (talk \| contribs) mNo edit summary ← Older edit		Latest revision as of 23:54, 18 December 2018 (view source) Adsb (talk \| contribs) m (Make it clearer that DNS provides SRV records)
(One intermediate revision by one other user not shown)
<indicator name="VoiceSIMs">[[File:Menu-sip2sim.svg\|link=:Category:~~Voice_SIMs~~Voice SIMs\|30px\|Back up to the Voice SIM Category Page]]</indicator> == Voice == Calls from the mobile are sent to the hostname specified, using the username and password specified. The called number is the dialled number from the phone. The CLI is the SIM's ICCID. The call comes from the same group of call servers and will normally be from the same IP address from which the registration request is sent. All calls each way are UDP SIP/2.0 control messages with G.711 64kbs a-law audio. The service uses DNS ~~and~~with SRV records. * The CLI for calls to a mobile should be sent as a full international number without the leading +. Other formats will work, but are likely to present with a + and the digits sent. This is an area we want to improve over time. You can, however, present any CLI. We can print with A&A logo and QR code link to SIM config, or without any A&A branding if you need. Please let us know. Supply artwork as full colour (ideally RGB BMP) 1024x648 300dpi. The following templates show the position of A&A branding and text, QR code, and SIM masking. Your artwork should cover the whole card rather than having gaps for the masked areas, etc., as we may change layout slightly from time to time and if there are changes to the cards themselves.