Revision as of 10:17, 25 February 2015 (view source) AA-Andrew (talk \| contribs) mNo edit summary ← Older edit		Revision as of 00:00, 8 March 2015 (view source) CrazyTeeka (talk \| contribs) mNo edit summary Newer edit →
==BT Sync Status Test== Available on BT ADSL lines. This will report back the current sync status of the line, including error counts. This is non-intrusive and should not cause the line to drop. Example output: <pre> BT Test xDSL Status Check:Pass Standalone sub test passed successfully. Pass OK. Circuit In Sync. BRAS=5779kbit/s FTR=6502kbit/s MSR=8128kbit/s ServOpt=1 I/L=A Up Sync=854kbit/s LoopLoss=22.6 dB SNR=17.5 dB ErrSec=0 HECErr=0 Cells=1677609▼ ~~Down~~Up Sync=~~6551kbit~~854kbit/s LoopLoss=4022.~~8 ~~6 dB SNR=1317.5~~ ~~ dB ErrSec=0 HECErr=~~N/A~~0 Cells=~~4001712~~1677609 ▲ UpDown Sync=~~854kbit~~6551kbit/s LoopLoss=2240.~~6 ~~8 dB SNR=1713.5~~ ~~ dB ErrSec=0 HECErr=0N/A Cells=~~1677609~~4001712 This shows the line is In Sync, with a Up sync of 854Kb/s, and down od 6.551Kb/s▼ </pre> ▲This shows the line is '''In Sync''', with aan '''Up ~~sync~~Sync''' of 854Kb/s, and ~~down~~a od'''Down ~~6.551Kb~~Sync''' of 6551Kb/s. ==FTTC 'End to End' ~~Tests~~Test==▼ ▲==FTTC 'End to End' Tests== Available on BT FTTC/FTTP lines. This will run FTTC/FTTP specific tests and will suggest if it finds a fault or not. Example result: <pre> BT Test E2E Access Test/DCN:Inconclusive OR test pass. Unable to find the fault. Down:40.0 (~~39.9/~~39.7/39.9/40.0) Up:10.0 (109.09/109.09/109.09) NA 0.128M-40M Downstream, Interleaving Off - 0.128M-10M Upstream, Interleaving Off. In Sync Pass:GTC_FTTC_SERVICE_0000 GEA service test completed and no fault found . </pre> If the test says... <pre> Down:40.0 (//) Up:10.0 (//) ...Then the line is probably not in sync (no sync figures given)▼ </pre> ▲...~~Then~~then the line is probably not in sync (no sync figures given). [[Category:Line Tests]]

Status Tests (view source)

Revision as of 00:00, 8 March 2015