12,274
edits
Status Tests: Difference between revisions
m
no edit summary
mNo edit summary |
|||
|
These tests will show the sync status of the line and as well as some other details such as errors etc. They may also state if a fault has been identified.
==BT Sync Status Test==▼
{{CPbox|#Click on the line you want to run the test on
#Click on the Status Test button}}
*Available on BT ADSL lines.▼
==Availability==
This will report back the current sync status of the line, including error counts. This is non-intrusive and should not cause the line to drop.
==Example output:==
<pre>
BT Test xDSL Status Check:Pass Standalone sub test passed successfully. Pass OK. Circuit In Sync.
This one shows that the line has a '''FTB''' - Fault Threshold Breach - ie, the Down Sync ('''6,144''') is less than the Fault Threshold Rate ('''6,374'''). The line speed is below what it should be and would need looking in to. See: [[:Category:Slow_ADSL]]
=
{{CPbox|#Click on the line you want to run the test on
#Click on the E2E Test button}}
==Availability==
▲*Available on BT FTTC/FTTP lines.
This will run FTTC/FTTP specific tests and will suggest if it finds a fault or not.
==Example result:==
<pre>
BT Test E2E Access Test/DCN:Inconclusive OR test pass. Unable to find the fault.
| |||